(12.2.2-en) LAN Interfaces
This article shows how to configure LAN interfaces in IGEL OS.
Menu path: Network > LAN Interfaces > [Interface]
Activate default interface (Ethernet)
☑ The interface is enabled. (Default)
☐ The interface is disabled.
Get IP from DHCP server
☑ The IP address of the client will be obtained automatically using DHCP. (Default)
DHCP options can be specified under Network > DHCP Options > Standard Options. For more information, see (12.2.2-en) DHCP Options.
Specify an IP address
The IP address and the network mask are entered manually.
IP address
IP address of the device
Network mask
Network mask of the device
IPv6 configuration
Compatibility mode: Behavior of earlier firmware versions. (Default)
Disabled: IPv6 completely disabled
Automatic: IPv6 auto configuration based on router advertisements (can include DHCPv6).
For further information, see RFC 4861.
DHCPv6: IPv6 configuration using DHCPv6 if router advertisements are not available.
This is mentioned in RFC 4862 Section 5.5.2.
Network link type
Auto sense (Default)
1000 Mbps Full Duplex
100 Mbps Full Duplex
100 Mbps Half Duplex
10 Mbps Full Duplex
10 Mbps Half Duplex
Force auto-negotiation
☑ The half-/full-duplex problems can be avoided for switches that expect the auto-negotiation flag for fixed bandwidths.
☐ Auto-negotiation is not forced. (Default)
LAN Tray App
Based on the status of the LAN connection, one of the following icons is shown in the taskbar. Clicking the icon opens the LAN tray app. The app displays details about the network connection and provides an option to quickly connect to and disconnect from LAN networks.
Taskbar Icon | LAN Status |
---|---|
Connected | |
No connection | |
Connected, but no internet | |
Connecting | |
Disconnected by user | |
Connection error |