(12.2.2-en) Touchpad
This article shows how to configure touchpad settings in IGEL OS.
The actual settings depend on the hardware supported by the particular touchpad.
Menu path: User Interface > Input > Touchpad
Enable touchpad on boot
☑The touchpad is enabled on boot. This can be overridden by the hotkey configured below. (Default)
Hotkey
☑ Each time you press the hotkey, you activate or deactivate the touchpad.
☐ No hotkey can be used to activate or deactivate the touchpad. (Default)
Modifiers
Modifiers for the hotkey
Key
Key for the hotkey
Custom configuration
☑ Further touchpad settings can be configured according to your needs.
☐ No custom configuration can be made. (Default)
Tapping mode
Switches the tapping mode on or off.
Possible values:
With tapping (Default)
Without tapping
Min speed
Minimum speed of the pointer in seconds. (Default: 1.00)
Max speed
Maximum speed of the pointer in seconds. (Default: 1.75)
Acceleration
Acceleration from the minimum to the maximum speed in seconds. (Default: 0.01)
With some touchpads, you can assign mouse actions to tapping the corners of the touchpad. The action can be configured for each corner to trigger a right, left, or middle mouse click.
Top left action (Default: No action)
Top right action (Default: Middle mouse button)
Bottom left action (Default: No action)
Bottom right action (Default: Right mouse button)