Document toolboxDocument toolbox

(12.3.2-en) Display Settings

Owned by Emese Pogany
Aug 04, 2023
3 min read

This article shows how to configure the display settings for the monitors in IGEL OS.

Take notice that a successful and correct display configuration depends, however, on many factors. For example, cables, current driver, BIOS settings, etc. can influence your screen configuration and, thus, have to be considered when setting up the monitor environment.

For information on how to use the Display Configurator for quick display configuration, see (12.3.2-en) Display Configurator.



Menu path: User Interface > Display Settings



Always try the configuration locally before applying it to multiple devices via a profile: A faulty display configuration can cause your GUI to become unstable and lead to a black screen.

If you face a black screen problem because of the wrong display configuration, try one of the following recovery options:

  • In the UMS: Edit the display configuration via Devices > [device name] > [device's context menu] > Edit Configuration or via a new profile.

  • In Web UMS: Edit the settings by clicking Edit Configuration in the Device Information of the device under Devices > [device name].

  • On the endpoint device: Restart the device and select Emergency boot (setup only) during the boot procedure. In the Setup, you can then change the display configuration.

General Settings

Number of screens

The number of monitors used can be selected by clicking the numbered buttons.

In a multimonitor configuration, every screen connected to the endpoint device can be configured independently after selecting the screen. The selected screen is highlighted with a yellow frame. The white bar at the bottom edge of the screen represents the physical orientation of the monitor. The position of the screens can be configured by drag&drop.



Screen resolution

The resolution can be selected from a drop-down menu. (Default: Autodetect)

You have the option of defining your own resolutions via the registry key x.xserver0.custom_resolution. In order for the values set there to take effect, the resolution must be set to Autodetect. The following parameters apply to the entry in the registry:

  • WxH : W = width, H = height (example: 1920x1080)

  • WxH@R : W = width, H = height, R = refresh rate (example: 1920x1080@60 or 1920x1200@59.8)











Screen rotation

The rotation can be selected from a drop-down menu. (Default: None)

Advanced Settings for the Screen

Detect refresh rate automatically

☑ A refresh rate for the monitor is identified automatically. (Default)

☐ A refresh rate for the monitor is to be set manually.



Refresh rate

Number of individual images per second
Possible values:

  • 30 ... 100 (Default: 60)






Graphic card

Graphic card assigned to the selected screen. A graphic card can have more outputs than are actually used. In order to ensure transparency, you may need to assign the graphic cards manually.





Monitor

Connection type. (Default: Automatic)