Document toolboxDocument toolbox

(12.4-de) Local User

Owned by Harald Saller
Aug 20, 2024
1 min read

Translation needed

The content of this page was copied from another page tree and needs to be translated or updated.

When you finish translation, make sure to

  • Replace the label NEEDS-TRANSLATING with TRANSLATED

  • Remove this macro from the page

This article shows how to configure the local login authentication in IGEL OS.

If several login methods are enabled, the login method can be selected on the login screen.

 

Menu path: Security > Logon > Local User

 

 

Login with local user password

☑ Upon the start of the device, a login screen is shown and authentication with a local user password is required. The password specified under Password is deployed to log in.

☐ No authentication is required upon device startup. (Default)

 

Password

The password deployed to log in. This password is also required for unlocking the screen if the Require password to unlock (screenlock) option is enabled under User Interface > Screenlock / Screensaver > Options. For more information, see (12.4-de) Options 5.

 

If the login method is configured and the Allow system logoff option is enabled under System > Power Options > Shutdown, the user can log off the device through the shutdown menu. For information on how to access the shutdown menu, see (12.4-de) Commands. For information on how to configure the shutdown menu, see (12.4-de) Shutdown.