(12.03-en) Import with Long Format

The long format provides detailed data as described in the following. The import file should be UTF-8 encoded.

• Directory: Storage directory in the UMS structure tree. This directory must exist before the devices are imported.
• Unit ID: If the device is an IGEL device or a device converted with UDC3 or IGEL OS Creator (OSC), the unit ID is identical to the MAC address of the device. If the device is a UD Pocket, the unit ID is hard-wired into the UD Pocket's USB flash drive.
• Product and Version: Product name and firmware version of the device (separated with a semicolon)

• Name: Name of the device

  • The maximal length of the device name is restricted to 15 characters if Adjust network name if UMS-internal name has been changed is enabled under UMS Console > UMS Administration > Global Configuration > Device Network Settings.
  • The length of the device name is not restricted if Adjust network name if UMS-internal name has been changed and Naming Convention are not activated under UMS Administration > Global Configuration > Device Network Settings.
  • Each device name will be automatically overwritten in compliance with the naming convention, even if Adjust network name if UMS-internal name has been changed is enabled, in case Enable naming convention is activated under UMS Administration > Global Configuration > Device Network Settings.

  See also (12.03-en) Device Network Settings for the IGEL Universal Management Suite (UMS).

• Site: Location of the device
• Department: Department to which the device is assigned
• Comment: Comment regarding the device
• Asset ID: Inventory number of the device
• In-Service Date: Date on which the device was commissioned
• Serial Number: Serial number of the device

• Profile Assignments: ID of the assigned profile or a list of IDs separated by commas if a number of profiles are to be assigned to the device

  You can remove a profile assignment already made by placing an exclamation mark in front of the profile ID. Example: !12
  The ID of a profile is shown in the description data and in the tooltip for the profile.
• Cost Center: Cost center to which the device is assigned

Code example

/Import;00E0C5540B9A;IGEL OS 11;11.01.100.01;IGEL-1;Büro1;EDV;Meier;0815;01.06.2019;F44M;26;01

/Import;00E0C5540B9B;IGEL OS 11;11.01.100.01;IGEL-2;Büro2;EDV;Müller;4711;01.06.2019;F45M;26;01

/Import;00E0C5540B9C;IGEL OS 11;11.01.100.01;IGEL-2;Büro3;EDV;Schulz;42;01.06.2019;F46M;26;01