(12.04.120-en_orig) Commands for Jobs
- Emese Pogany
- Harald Saller
Owned by Emese Pogany
Here you find information on the commands that you can define for a job in the IGEL Universal Management Suite (UMS).
- Update
- IGEL OS 12: Triggers the activation of the assigned app version for IGEL OS 12 devices. The Update command is only needed if System > Update > Activate app after the installation is disabled; see (12.04.120-en_orig) How to Configure the Background App Update in the IGEL UMS Web App.
- IGEL OS 11 or earlier: Executes the firmware update with the existing settings, see also (12.04.120-en_orig) Universal Firmware Update 2.
- Shutdown: Shuts down the device.
- Reboot: Restarts the device.
- Suspend: Puts the device into suspend mode.
- Wake up: Starts the device via the network (Wake-on-LAN).
- Update on Boot: Executes the firmware update when the device is booting (IGEL OS 11 or earlier).
- Update when shutting down: Executes the firmware update when the device shuts down (IGEL OS 11 or earlier).
- Settings Device->UMS: Reads the local device settings to the UMS.
- Settings UMS->Device: Sends the UMS local settings to the device.
- Download Flashplayer: Downloads the Flash Player plugin for Firefox.
- Remove Flashplayer: Removes the Flash Player plugin for Firefox.
- Download Firmware Snapshot: Executes the firmware update with the existing settings (WES).
- Send Message: Sends a selected message template to the devices. You can create templates for messages under UMS Administration > Global Configuration > Messages to Devices. For more information on templates, see (12.04.120-en_orig) Send Message.
- Partial Update: Executes the partial update with the existing settings (WES). See also Partial Update.
- Update desktop customization: Updates the desktop background and the boot logo.
- BIOS - Get settings: Gets the current BIOS settings from the device. This command is used by the BIOS Tools for Selected HP Devices.
- BIOS - Set password: Sets a password for the BIOS. This command is used by the BIOS Tools for Selected HP Devices.
- BIOS - Set settings: Deploys the changed BIOS settings to the device. This command is used by the BIOS Tools for Selected HP Devices.
- BIOS - Trigger update: Triggers a BIOS update. This command is used in the BIOS Update for Devices Supported by LVFS and by the BIOS Tools for Selected HP Devices.
- Deploy Jabra Xpress package:Â Installs a Jabra Xpress package (IGEL OS).
- OS 11 Upgrade: Upgrades devices from IGEL OS 10Â to IGEL OS 11. For details, see Mass Deployment Using a Scheduled Job.
- Start Login Enterprise launcher: Starts Login Enterprise Launcher if it has been configured, see Login Enterprise Launcher in IGEL OS.
- Update the firmware of an attached HP G5 Dock
- Upgrade to IGEL OS12