Devices can be wakened via the network using magic packets. A magic packet contains the MAC addresses of the devices that are to be wakened. In order for a device to be wakened, it must be in either S3 (suspend to RAM – STR), S4 (suspend-to-disk – STD) or S5 (soft-off) mode. In the Universal Management Suite (UMS) administration, you can specify the network addresses to which the magic packets are sent.
For scenarios where the UMS is outside the devices' network and broadcast packets from the WAN are not allowed, you can define one or more Linux devices as a Wake-On-LAN (WoL) proxy.
Menu path: UMS Administration > Global Configuration > Wake on LAN
Broadcast address
The magic packet is sent to the broadcast address of the network. (Default)
Last known IP address of the device
The magic packet is sent to the last known IP address of the device. (Default)
Automatic Wake On LAN proxy detection
Other clients in the subnet are not used as WoL proxy.
If any other client in the subnet is online, this client is automatically used as WoL proxy. (Default)
All defined subnets
The magic packet is sent to the network addresses of all subnets that are defined for the UMS.
The magic packet is not sent to the network addresses of all subnets that are defined for the UMS. (Default)
To add a subnet, proceed as follows:
- Enable All defined subnets.
- Click
in the area below All defined subnets.
The Define subnets dialog is displayed. - In the Subnet field, enter the network address of the subnet.
Under CIDR (Classless Inter-Domain Routing), select the suitable suffix for the network mask.
Values between 8 and 28 are appropriate. Example 1: The network address
10.43.8.0
with the suffix 24 corresponds to the CIDR notation10.43.8.0/24
with the network mask255.255.255.0
. This network corresponds to a Class C network. The addresses that can be used by hosts lie between10.43.8.1
and10.43.8.254
. Example 2: The network address10.43.8.64
with the suffix 28 corresponds to the CIDR notation10.43.8.64/28
with the network mask255.255.255.240
. The addresses that can be used by hosts lie between10.43.8.65
and10.43.8.78
.- If you wish, add a Comment.
- Click OK.
Network address of last known IP address
The magic packet is sent to the network address of the network in which the last known IP address of the device is located. In order for this network address to be determined, you will need to specify a network mask for each of the possible networks.
The magic packet is not sent to the network address of the network in which the last known IP address of the device is located. (Default)
To add a network mask, proceed as follows:
- Click on
in the area below Network address of last known IP address.
The Define network mask dialog is displayed. - Enter the Network Mask.
- If you wish, add a Comment.
- Click on OK.
Dedicated Wake On LAN Proxies
The magic packet is sent to the devices defined as Wake-On-LAN proxies. Each Wake-On-LAN proxy will send the magic packets as a broadcast within the network in which it is located.
The magic packet is not be sent to the devices defined as Wake-On-LAN proxies.
To define one or more devices as Wake-On-LAN proxies, proceed as follows:
- Click on
in the area below Dedicated Wake On LAN Proxies.
The Edit Wake On LAN Proxies dialog will open. - Highlight the desired device in the left-hand column.
- Click on
to select the device.
- Click on OK.
The device will now function as a Wake-On-LAN proxy.
To undo the configuration as a Wake-On-LAN proxy, proceed as follows:
- Click on
in the area below Dedicated Wake On LAN Proxies.
The Edit Wake On LAN proxies dialog will open. - Highlight the desired device in the right-hand column.
- Click on
to deselect the device.
- Click on OK.
The device will no longer be configured as a Wake-On-LAN proxy as soon as the setting is sent to the device.