Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Menu path: System > Import > Import Devices as Profiles

You can import device settings as profiles. In order for this to be possible, the settings must have been exported with System > Export > Export Device Settings; see (12.04.120-en_orig) Export Device Settings in the IGEL UMS.


To import device settings as profiles, proceed as follows:

  1. Go to System > Import > Import Devices as Profiles.
  2. Select the file with the settings and click on Open.
    The Import Devices as Profiles window will open.
  3. In the Import column, select the settings that are to be imported.
  4. In the Firmware (selectable) column, select the firmware on which the profile will be based. (default: the firmware installed on the device when the export takes place)
    The profiles are set up in the Profiles directory. The name of each profile is identical to the name of the device from which the settings originate.
    The profiles created from the import are shown in the Results window.
  • No labels