Document toolboxDocument toolbox

(12.1-en) Wireless

Owned by Emese Pogany
Jul 26, 2023
2 min read

This article shows how to configure wireless connections in IGEL OS.

If you use wireless regularly, it is recommended to enable the following options: Enable tray icon, Enable context menu, and Enable Wireless Manager.

If you have to frequently switch between LAN and WLAN networks, it is also useful to activate Enable Wi-Fi automatic switch.

 

Menu path: Network > Wireless

 

 

You can find details of compatible wireless hardware in the IGEL Linux 3rd Party Hardware Database.

 

 

Activate wireless interface

☑ The wireless interface is enabled. (Default)

☐ The wireless interface is disabled. 

 

Get IP from DHCP server

The IP address of the endpoint device will be obtained automatically using DHCP. (Default)

DHCP options can be specified under Network > DHCP Options. For details on the configuration, see (12.1-en) DHCP Options.

 

Specify IP address

The IP address and the network mask are entered manually.

 

IP address

IP address of the endpoint device

 

Network mask

Network mask of the endpoint device

 

IPv6 configuration:

  • Compatibility mode: Behavior of earlier firmware versions. (Default)

  • Disabled: IPv6 is completely disabled.

  • Automatic: IPv6 auto-configuration is based on router advertisements (can include DHCPv6).
    You will find further information in RFC 4861.

  • DHCPv6: IPv6 configuration using DHCPv6 if router advertisements are not available.
    You will find further information in RFC 4862 Section 5.5.2.

 

Enable tray icon

☑ A tray icon for the wireless interface will be shown. (Default)

 

Enable context menu

☑ A context menu will be shown when you click on the tray icon. (Default)

 

Enable network info dialog

☑ A dialog window with information regarding the network connection will be shown when you click on the context menu. (Default)

 

Enable Wireless Manager

☑ The Wireless Manager is enabled. This tool allows the user to establish a connection to a wireless network quickly. (Default)
For more information on the tool, see (12.1-en) Wireless Manager.

 

Enable Wi-Fi automatic switch

☑ When a device is disconnected from the network cable, Wi-Fi is automatically turned on. When the device is connected again to the network cable, Wi-Fi is automatically turned off.

  • If the registry key System > Registry > network.applet.wireless.enable_wifi_switch is enabled, automatic mode is added to the Wi-Fi switch. For more information, see (12.1-en) Switch for the Wi-Fi Connection.



  • If the registry key System > Registry > network.applet.wireless.enable_wifi_switch is disabled, Wi-Fi automatic switch functionality will work in the background. The option for changing the Wi-Fi mode is not shown.

☐ An automatic connection to a wireless network is disabled. (Default)