...
Info |
---|
You can also use the Mobile Broadband Tray App for quick configurations. For details, see Tray Applications in IGEL OS 12. |
...
Menu path: Network > Mobile Broadband
...
Warning |
---|
Ensure that data traffic is adequately secured. You can do this in the following ways:
|
If the surf stick is inserted and has been configured, the network connection will be established after the endpoint device boots. It can take between a few seconds and around 1 minute to establish a connection. The network connection will remain in place until the surf stick is removed or the endpoint device is put on standby or shut down.
The status of the network connection is shown in the system tray:
The network connection is established; the endpoint device is online. This symbol is shown if Modem is selected as the device type:
...
If Router is selected as the device type, the corresponding symbol for a LAN
...
connection is shown: .
The network connection was interrupted; the endpoint device is offline. This symbol is shown if Modem is selected as the device type:
...
If Router is selected as the device type, the corresponding symbol for a LAN connection is shown:
...
.
You can change the following settings:
Enable Mobile Broadband Include Page
The ☑ The mobile broadband network can be used if a supported modem is connected. (Default)
Include Page
...
The type of the connected device.
Possible options:
Modem: The device will be operated as a modem. The access data can be changed with the
parametersparameters number, user name, password, APN, network ID
andand PIN. (Default)
Router: The device will be operated as a router. The device must be configured in advance in such a way that it is ready for use when it is inserted.
Info |
---|
Select the Router device type if you use a device from Huawei in the HiLink mode; example: Huawei E3372. |
When Modem is Selected as Device Type
...
Enable automatically connect Include Page
☑ The mobile internet connection is established automatically. (Default)
...
Allow changing the SIM-PIN in the tray application
Include Page
Allow changing the request for the SIM-PIN after boot inside the tray application Include Page
☑ The request for the PIN after booting can be enabled/disabled in the tray application. (Default)
Roaming Include Page
☑ The WWAN modem is allowed to connect to roaming networks. (Default)
Include Page
...