Page Comparison

In the IGEL UMS Web App, you can create profiles for configuring settings for your devices. For general information on profiles, see Profiles in the IGEL UMS. 

...

6. Click Save. 
   The profile will be saved and listed under Configuration > Profiles, even if you will not configure any settings in the next step.
   

7. Configure the desired settings.
   The configuration dialog shows only those settings that can be configured for the selected app(s). If you want to change the scope of the profile (i.e. redefine which apps should be configured by the profile), click App Selector .

   	The parameter is inactive and will not be configured by the profile. IMPORTANT: When you deactivate the parameter, the value will be automatically set back to the default value.
   	The parameter is active and the set value will be configured by the profile.

   

...

1. Under UMS Web App > Apps, select the required app and click Create new profile. 

   

2. Enter the name of the profile and specify the desired directory for storing the profile under Location. If desired, add the description for the profile.
   

3. Click Save.
   The profile will be saved and listed under Configuration > Profiles, even if you will not configure any settings in the next step.
   

4. Configure the desired settings.
   The configuration dialog shows only those settings that can be configured for the selected app. If you want to change the scope of the profile (i.e. redefine which apps should be configured by the profile), click App Selector .
   

   	The parameter is inactive and will not be configured by the profile. IMPORTANT: When you deactivate the parameter, the value will be automatically set back to the default value.
   	The parameter is active and the set value will be configured by the profile.

   

...

1. In the UMS Web App > Configuration, click Create new profile button.
   

2. Select OS 11 (shown only if there are OS 11 devices registered in the UMS).

   

3. Select the firmware version the profile is based on.
   

4. Enter the name of the profile.
   

5. If desired, add the description for the profile.
   

6. Click Save. 
   The profile will be saved and listed under Configuration > Profiles, even if you will not configure any settings in the next step.
   

7. Configure the desired settings.

   	The parameter is inactive and will not be configured by the profile. IMPORTANT: When you deactivate the parameter, the value will be automatically set back to the default value.
   	The parameter is active and the set value will be configured by the profile.

   

...