Versions Compared

Old Version 3

changes.mady.by.user Emese Pogany

Saved on

compared with

New Version 4

changes.mady.by.user Emese Pogany

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. In the UMS Console, click Profiles > [context menu] > New Profile or System > New > New Profile.
    Alternatively, you can import a previously created profile. See Exporting and Importing Profiles.



    The New Profile window will appear.

  2. Enter a Name and a Description for the profile.

  3. Under Based on, select a firmware version for the new profile.

  4. Optional (usually not required): Click Expert mode to define the following settings:

    image-20240617-063230.png

    • Inherits Settings from: You can specify here whether the new profile should use settings from an existing profile or device. If yes, select the required profile / device from the list.

    • Activate no settings: Initially, there are no active parameters. (Default)

    • Activate all settings: All available parameters of the profile will be active.

    • Overwrite sessions: All free instances will be overwritten by the profile.

Note

IMPORTANT! Before changing the default settings here, inform yourself about the possible consequences, see "New Profile: Expert Mode" below. Activate all settings will block all settings in the local Setup! Overwrite sessions should be activated only in exceptional cases! With this option, you can override free instances of all other profiles.

  1. Click OK to set up and save the profile.

Info

The new profile will be placed in the selected profile directory. If no directory is selected, the new profile will be put directly in the directory Profiles.

  1. Configure the desired settings. 
    To change settings, click on the activation symbol in front of the parameter until the desired function is active.
    image-20240614-151422.pngImage Modified - The parameter is inactive and will not be configured by the profile.
    image-20240614-151427.pngImage Modified - The parameter is active and will be configured by the profile. Template keys are inactive.
    image-20240614-151432.pngImage Modified - Reset to the default value.
    The following activation symbols are only displayed if template profiles are activated (see Template Profiles in the IGEL UMS):
    image-20240614-151439.pngImage Modified - The parameter is active and will be configured by the profile. Template keys are active.
    image-20240614-151445.pngImage Modified - The parameter is active and will be configured by the profile using a template key.

    Image Modified

  2. Save the settings:

    • Click Apply and send to device to save the settings without quitting the profile.

    • Click Save to save the settings and quit the profile.

  3. Assign the profile to the required devices / device directories. See How to Allocate IGEL UMS Profiles.

New Profile: Expert Mode

Note

Expert mode for profiles is usually NOT required and should only be used in exceptional cases.

...